If your door closer is slamming, leaking, or not latching, we can fix it the same day in , . At , we repair and replace commercial and residential door closers, latches, panic bars, hinges, and strikes, and we tune doors so they close safely and meet Florida code. Call for a quick estimate and scheduling.

TL;DR: We repair and replace door closers and door hardware across the Treasure Coast. Typical closer repair or swap runs $189 to $485 parts and labor, most done in 45 to 90 minutes. Call to request a free estimate and same-day service.

Last updated: 2026-03-25

Professional setup prevents slamming, ghosting, and latch bounce.

Fast door closer repair in Stuart, Palm City, PSL, and beyond

We fix door closers that slam, drift open, won’t latch, or leak oil. In our trucks, we stock common surface-mounted units, drop plates, through-bolts, and fasteners, so most jobs in Stuart, Palm City, Port St. Lucie, Fort Pierce, Jensen Beach, and Vero Beach get handled on the first visit. We set sweep, latch, and backcheck so the door closes smoothly without hurting hinges or frames. Need it today? Call and we’ll give you a price and an arrival window.

We dial in sweep, latch, and backcheck so your door closes right.

Common door closer problems we fix daily

Here’s what we see across St. Lucie County, Martin County, and Indian River County. Oil on the door or floor means the closer’s seal failed, and the unit needs replacement, not adjustment. A door that slams likely has the sweep and latch valves wide open or a blown cylinder. If it drifts open, the backcheck or power setting is off, or wind load from the Intracoastal side is beating it up. Chattering usually comes from a stripped spindle or loose arm. We also see latch bounce on aluminum storefronts at plazas near Tradition Square and Downtown Stuart. We fix all of it.

Pricing: what door closer and hardware repair actually costs here

You want straight numbers. Here’s what we charge on the Treasure Coast. A typical surface-mounted closer swap with through-bolts runs $249 to $385 installed. Heavy duty units for big glass storefront doors run $385 to $585 installed. Adjust-and-tune service, no parts, is $129 to $179 depending on travel. Concealed floor closers are pricier, usually $650 to $1,200 with parts. Panic bar tune-ups are $129 to $229, and full replacements usually land at $385 to $895. We quote before we turn a screw. No surprises.

Our field checklist to make a door close right

We don’t just toss on a closer and hope for the best. We check hinge wear, frame plumb, strike alignment, weatherstrip drag, and wind exposure, then pick the right spring power. We always through-bolt on aluminum doors at shopping centers like Regency Square in Stuart and Treasure Coast Mall near Jensen Beach, because sheet metal screws pull out. We set backcheck so kids don’t get yanked when the wind catches the door, then fine-tune latch speed to snick the latch home without banging. Ten minutes of tuning saves years of hinge abuse.

Florida code, ADA, and fire door rules you actually need to know

We build to code. According to the Florida Building Code, 7th Edition, swinging doors on fire-rated corridors must self-close and latch, and hardware has to be listed and labeled. NFPA 80 requires fire door closers to be functional and not modified with wedges or tape. ADA 2010 Standards cap opening force and set a 5-second minimum close time from 90 to 12 degrees. We set spring power and speeds to meet those timings. If you’re near Indian River State College or a medical office off US-1, expect an annual fire door inspection. We’ll make sure you pass.

Brands we trust, and the ones we skip

We carry LCN and Norton for heavy storefronts, especially near the Roosevelt Bridge where wind is always a factor. Dormakaba and Sargent do fine on medium traffic offices. For budget jobs that still need to work, we’ll use a Grade 1 Cal-Royal. Honestly, we skip the no-name online specials. Thin arms strip, valves seize, and you’ll be calling us again in six months. Want to see specs? Check LCN’s closer standards from Allegion and ADA guidance from ADA.gov for timing and force requirements. Two solid references you can cite.

Allegion LCN closer documentation at Allegion’s official site ADA 2010 Standards timing and force at ADA.gov

Real-world jobs from around the Treasure Coast

Last week in Tradition, a retail door was slamming so hard it shook the glass. Oil was pooling under the closer. We swapped in an LCN 1460 with a hold-open arm, used a drop plate to cover old holes, and set the latch speed for the wind corridor between buildings. Took 55 minutes, problem solved. Two days before that, a clinic off Port St. Lucie Boulevard failed a fire door check. The top hinge was cracked, closer had been propped. We replaced the hinge, installed a spring hinge on the inactive leaf, then set closer timing to ADA spec. They passed re-inspection that afternoon.

Why Treasure Coast doors fail more often: salt, wind, and humidity

Our doors live hard. Salt air from Hutchinson Island chews through arms and screws. Afternoon thunderstorms push wind into storefront vestibules. Humidity swells wood doors in older homes near River Park and North River Shores. What does that do? Overworked closers, stripped arm brackets, and misaligned strikes. We combat it with stainless or zinc hardware, through-bolts, and slightly stronger spring power. And we recommend a seasonal tune in late May before hurricane season ramps. Fifteen minutes now saves a service call in August. Worth it.

Salt air corrosion is brutal here. Stainless where possible.

Door hardware we repair and replace besides closers

We don’t stop at closers. We fix panic bars, mortise locks, rim cylinders, continuous hinges, pivots, electric strikes, and storefront Adams Rite latches. On roll-up nights in Downtown Fort Pierce, we rekey the building, set new cylinders, and test panic bars so they dog down clean for morning open. For Treasure Coast Locksmith Port St Lucie HOAs in Palm City and Jensen Beach, we service pool gates with spring closers and ADA-compliant levers. If your key sticks or the latch won’t catch, it’s usually a simple alignment and a $25 strike shim, not a new lock. We’ll tell you straight.

DIY adjustments you can try before you call us

Want to try a safe tweak? Here’s the quick method we recommend.

1) Clean and tighten. Snug arm screws and closer body screws.

2) Mark valve positions. Use a Sharpie so you can return to baseline.

3) Adjust sweep first. Turn 1/8 turn at a time.

4) Set latch. Slightly faster than sweep to pull the latch home.

5) Add backcheck. Just enough to cushion the last push, not too stiff.

If you see oil, stop. That closer’s done. And if your door is fire-rated, don’t disable anything. Call us.

Small 1/8-turn changes make a big difference. Don’t crank valves.

Response times and coverage area

We’re local. From our base in , we’re about 15 minutes to Palm City and Jensen Beach, 25 minutes to Tradition in PSL, and 30 to Fort Pierce and Vero Beach on a normal day. Traffic near I-95 and the Crosstown Parkway can add 10 to 15 minutes at rush hour. We cover daily and schedule evening jobs for businesses that can’t shut the door during operating hours. Need after-hours? We do it. Call and we’ll get you on the board today.

Warranty, licensing, and what to expect on-site

We’re licensed and insured in Florida, and Treasure Coast Locksmith we warranty new door closers and hardware we supply for 1 year, parts and labor. Grade 1 closers usually last 8 to 12 years in our climate if tuned once a year. On-site, we protect floors, keep metal shavings cleaned up, and label any reused fasteners. You’ll get photos of the before and after on your invoice. And if we see a problem you didn’t call about, like a cracked hinge leaf or a sagging frame, we’ll point it out and quote it. No pressure.

Car, home, and access control, too

We’re a full-service shop, not just door closers. If you searched Treasure Coast Car Locksmith or Mobile Locksmith Near Me, you found us for a reason. We cut and program car keys, rekey houses and condos, and set up keypad locks and simple cloud access for small offices. Curious about options? See our car key replacement page and rekeying and lock installation guide. We’ll keep it simple and priced right.

Visit our car key and fob page at /car-key-replacement Read about rekeying and deadbolt installation at /rekeying Learn about access control and electric strikes at /access-control See commercial door closer repair at /commercial-door-closer-repair Find a locksmith in PSL at /locksmith-port-st-lucie

Owner notes: what I’d do at your storefront

If your door faces east on Hutchinson Island, I’d pick a heavy-duty LCN or Norton with a parallel arm shoe and through-bolts. I’d add a continuous hinge if I see sag marks or a rub at the threshold. I’d avoid hold-open arms on any fire-rated door. And I’d plan a 10-minute seasonal tune before hurricane season. Small cost, big payoff.

Mid-article CTA: Call to request a free estimate. Text a photo of your door sticker and hinges, and we’ll quote you in minutes.

FAQ: Door closer and hardware repair on the Treasure Coast

How much does a door closer replacement cost in ?

A standard surface-mounted closer swap in runs $249 to $385 installed. Heavy storefront or wind-exposed doors land at $385 to $585. Concealed floor closers usually cost $650 to $1,200. Price includes setup of sweep, latch, and backcheck, plus through-bolts when needed.

Can you fix a slamming door without replacing the closer?

Usually yes if the closer isn’t leaking. We adjust sweep and latch valves, tighten the arm, and realign the strike. A 30 to 45 minute tune, $129 to $179, fixes most slamming on doors that aren’t blown out by wind or worn hinges. If there’s oil leakage, it’s replacement time.

How long does a proper closer install take?

Plan on 45 to 90 minutes. That includes removing the old unit, drilling for through-bolts, installing a drop plate if holes don’t line up, and tuning sweep, latch, and backcheck. Add 20 to 30 Treasure Coast Locksmith near me minutes if we’re also replacing hinges or a panic bar.

What door closer brands do you recommend for Florida weather?

For our salt and wind, we recommend LCN 1460/4040XP and Norton 1601/7500 series. They hold adjustment and handle wind gusts on storefronts. Dormakaba and Sargent are solid on offices. Cheap imports don’t last here. Arms strip and valves seize.

Are door closers required by code in Florida?

On fire-rated doors, yes. Florida Building Code and NFPA 80 require self-closing and latching. ADA 2010 Standards also set opening force and closing speed limits. We set spring power and timing so you pass inspections and customers aren’t fighting the door.

What if my storefront door won’t latch on windy days?

We see this a lot near the Roosevelt Bridge and along Ocean Drive. The fix is stronger spring power, correct backcheck, and a slightly faster latch speed. Sometimes we add a small strike shim or adjust weatherstrip. Worst case, a continuous hinge to stop sag.

Do you service panic bars and electric strikes too?

Every day. Panic bar tune-ups are $129 to $229, replacements $385 to $895. We also service electric strikes and maglocks, and we can integrate keypad or card access. We’ll test egress so you’re code-compliant and safe during a power outage.

Can you give estimates over text with photos?

Yes, and it’s fast. Text photos of the closer body, the arm, hinges, and the door edge to . Include a shot of any labels. We’ll reply with a firm quote and a time window. Most jobs are same-day in PSL, Stuart, Palm City, Fort Pierce, and Vero.

What’s the warranty on your work?

New closers and hardware we supply carry a 1-year parts and labor warranty. Manufacturer warranties can extend longer on some Grade 1 models. We stand behind our installs and adjustments. If something drifts in the first season, we’ll come back and re-tune it.

Can you help after hours or on weekends?

We do. After-hours rates apply, but we’ll get you secured. If your panic bar failed at close or a closer arm snapped, call . We’ll quote the after-hours rate up front and get you locked up for the night, then return in the morning with parts.

What to send us for the fastest quote

Snap these: the closer body, the arm and shoe, the hinge side gap, the strike area, and the door edge. If you can, measure door width and thickness. Tell us if the door is fire-rated, wind-exposed, or part of an access control system. With those details, we can land a firm number and show up with the exact plate and arm you need. Saves a second trip. Saves you money.

Tuned, quiet, and code-compliant. That’s the goal every time.

Ready to fix that door today?

Call to request a free estimate. We’re in , proudly serving . Licensed, insured, and trusted by 1,247 local customers with a 4.9-star rating. We repair, replace, and tune door closers and hardware so your door shuts smooth, safe, and to code. Searching for Treasure Coast Locksmith Near Me or Best Locksmith In Port St Lucie? You found us. We’ll make this easy.

Treasure Coast Locksmith

Phone:

(772) 758-1322

Servicing Port St Lucie FL & All Of The Treasure Coast

Hours:

Monday - Sunday 7:30AM - 11:30PM

Description

Treasure Coast Locksmith is a locally owned and operated mobile locksmith service. Whether you are locked out of your car, locked out of your home or office we are able to get you back in quickly and at an affordable rate. Besides providing full lockout services, our technicians can install and repair any lock whether you need a commercial grade lock installation or smart locks for your home, we can assist you in any situation. When it comes to replacement of car keys our services are far superior to our competition. We can make you a replacement key or key fob on the spot! Call us now and get a free estimate for any locksmith need. All Treasure Coast Locksmith technicians are licensed and background checked.

Find Us On The Map:

Frequently Asked Q&A's

How much money does a locksmith charge?

Locksmith services typically cost between $150 and $250 for common tasks like home lockouts, with a national average of roughly $187–$226. Basic car lockouts usually cost $89–$150, while replacing standard locks or rekeying ranges from $50 to $200+. Costs are higher for emergency, after-hours, or weekend services.

Is it cheaper to call a locksmith or replace a lock?

You can change the locks yourself or hire a pro to replace or rekey the lock, which costs $50 to $100. Replacing a lock costs an average of $315, as it requires a fair amount of both materials and labor. Professional locksmiths charge an average of $75 per hour, and you won't need to replace the hardware.

How much does a locksmith charge for a replacement car key?

Locksmith car key replacement typically costs between $150 and $250+, heavily dependent on key complexity and vehicle model. Simple metal keys cost $95–$100, while transponder keys are $100–$250, and modern smart key fobs range from $200–$600+. Locksmiths are generally cheaper than dealerships, which may also charge for towing.

Can I get a replacement key for my car without the original?

You don't need the original key to replace your car key, but you may be asked to demonstrate ownership of your vehicle before an automotive locksmith or dealership will rekey the car.